Attention to the certification of LED lamps.
As the market penetration rate of LED lamp products increases year by year, the manufacturers of various lamps and lanterns also focus on the product of LED lamps and lanterns.LED as a new technology drives around various related technology development, at the same time of developing gradually produce all kinds of unexpected problems, new market participants also through its original advantages to redefine the market.
The popularity of LED lamp technology is regarded as the ideal substitute for the traditional lamp which consumes huge energy because of its low energy consumption.With its rich color, it is widely used in home lighting, commercial lighting and landscape lighting.So on the issue of the lamps and lanterns product safety certification, the most common certification program in addition to the CE certification, CCC certification and energy-saving certification, by the optimal detection resistance below small make up to you finishing the matters needing attention about the LED street light energy-saving product certification
LED street light energy-saving product certification requirements and safety certification requirements there are some differences, often is ignored in the process of certification, often leads to safety certification, after because energy difference demands that, in turn, change the situation of the safety certificate, terms and conditions as follows: the main differences between the
A, mark
In addition to the requirements of GB 7000.203-2013 chapter 5, LED street lamps should have clear and durable landmarks as follows:
1. Model and specification (rated luminous flux and rated correlation color temperature);
2. Rated power supply voltage and power frequency, power current, rated power and power factor;
3. Install the adjustable LED street lamp, and the corresponding adjustment Angle should be marked.
In addition to the above mandatory labeling, the following applicable content shall be marked on the luminaire, or in the manual of the product manufacturer or distributor:
1. Applicable power supply voltage range;
2. Dimensions and weight;
3. Specifications and manufacturers of the control devices available;
4. If the installation Angle can be adjusted, the product should be marked with the corresponding meaning;
5. Installation conditions, including: road type, road width, lane number, road surface material, layout mode, installation height, 6, light pole mounting distance, suspension length and elevation Angle, etc.
2. Dustproof, solid foreign body and waterproof.
LED street lamp IP protection class should be IP65 or IP66.
Three, weight,
For different LED street lamp specifications, the product weight should not exceed the limit in table 1:
4. Applicable work requirements.
In 90-110% of the rated supply voltage range can be normal work, under the condition of - 30 ℃ ~ 45 ℃ should be able to work properly, at the same time, the LED street lamp shall meet the requirements of the specific use of environmental temperature, humidity and corrosion resistance, and other special requirements.
For more details on the certification information, please send the product and related information to united testing email: hofferlau@uni-lab.hk, support@uni-lab.hk or call service hotline: 0755-86180996 or add WeChat: 13699796815.
The popularity of LED lamp technology is regarded as the ideal substitute for the traditional lamp which consumes huge energy because of its low energy consumption.With its rich color, it is widely used in home lighting, commercial lighting and landscape lighting.So on the issue of the lamps and lanterns product safety certification, the most common certification program in addition to the CE certification, CCC certification and energy-saving certification, by the optimal detection resistance below small make up to you finishing the matters needing attention about the LED street light energy-saving product certification
LED street light energy-saving product certification requirements and safety certification requirements there are some differences, often is ignored in the process of certification, often leads to safety certification, after because energy difference demands that, in turn, change the situation of the safety certificate, terms and conditions as follows: the main differences between the
A, mark
In addition to the requirements of GB 7000.203-2013 chapter 5, LED street lamps should have clear and durable landmarks as follows:
1. Model and specification (rated luminous flux and rated correlation color temperature);
2. Rated power supply voltage and power frequency, power current, rated power and power factor;
3. Install the adjustable LED street lamp, and the corresponding adjustment Angle should be marked.
In addition to the above mandatory labeling, the following applicable content shall be marked on the luminaire, or in the manual of the product manufacturer or distributor:
1. Applicable power supply voltage range;
2. Dimensions and weight;
3. Specifications and manufacturers of the control devices available;
4. If the installation Angle can be adjusted, the product should be marked with the corresponding meaning;
5. Installation conditions, including: road type, road width, lane number, road surface material, layout mode, installation height, 6, light pole mounting distance, suspension length and elevation Angle, etc.
2. Dustproof, solid foreign body and waterproof.
LED street lamp IP protection class should be IP65 or IP66.
Three, weight,
For different LED street lamp specifications, the product weight should not exceed the limit in table 1:
4. Applicable work requirements.
In 90-110% of the rated supply voltage range can be normal work, under the condition of - 30 ℃ ~ 45 ℃ should be able to work properly, at the same time, the LED street lamp shall meet the requirements of the specific use of environmental temperature, humidity and corrosion resistance, and other special requirements.
For more details on the certification information, please send the product and related information to united testing email: hofferlau@uni-lab.hk, support@uni-lab.hk or call service hotline: 0755-86180996 or add WeChat: 13699796815.
评论
发表评论